Anodised Aluminium Shop front in London

You might have seen various anodized aluminum products in your daily life. Anodizing an aluminium metal is an easy way to add a corrosion protection layer and a splash of color to it. You’ll find this anodised finishing on various products such as sports equipment, automotive parts, etc. Also, you might have seen anodised aluminium shop fronts at various commercial places. So, if you are wondering whether anodizing products are the best way to finish your aluminum products or not? Then this article is for you.  __________________________________________________________________________   What is Anodised Aluminium?     __________________________________________________________________________  Exposing metals to certain environments such as air and humidity creates a metal-oxide layer on its exposed surface. For example, aluminum metal naturally forms an oxide layer as soon as it comes in contact with air or moisture.    This layer serves as a shield to prevent any further oxidation of the aluminum metal. The oxide layer is passive in nature which will no longer react with the environment as the pure metal does. For example, the rust that gets deposited on iron metal when it is left open.   While anodizing the aluminum, the metal thickens its naturally-occurring protective oxide layer. This makes it anodised aluminium that enhances the properties which are offered by its oxide layer.  __________________________________________________________________________      Types of Anodising __________________________________________________________________________    There are 2 types of anodising depending upon the thickness of the aluminium hydroxide layer:__________________________________________________________________________  Decorative Anodising __________________________________________________________________________  Decorative anodising targets to not only layout a nice aesthetic finish but also provides extra protection to the product.    The ISO 7599:2018 specifies the right method for decorative anodising for aluminium and its alloys. According to them, the thickness of the anodised layer should range between 5µm to 25µm.    If you want to obtain the best results, then it is better to keep the anodising  thickness between 15µm to 25 µm while dyeing the products.  __________________________________________________________________________  Hard Anodising     __________________________________________________________________________    Hard anodizing is an electrolytic treatment that forms a hard and thick alumina coating on the metal. This process is used for engineering purposes such as in marine applications. __________________________________________________________________________    ISO 10074:2017 has approved the specifications for the thickness of hard anodic oxidation coatings on the product. It should range between 25µm and 50µm.    __________________________________________________________________________    Hard anodized is used to obtain:   __________________________________________________________________________    Wear resistance through abrasion, Electrically insulated, Thermally insulated, Repairing of worn parts, Corrosion resistance __________________________________________________________________________  Benefits for Anodising the Aluminium Shop fronts __________________________________________________________________________  The anodized finish is the only one in the metals industry that satisfies each of these below-mentioned factors. There are various benefits of anodising the aluminium shop front: __________________________________________________________________________  Durability and no adhesion failure - Anodising provides a finish that gets mixed with the aluminum for strong bonding and adhesion. __________________________________________________________________________    Thus, there is no risk of adhesion failures such as peeling, cracking even on cut edges or joints.  __________________________________________________________________________      Excellent Abrasion Resistance __________________________________________________________________________    Aluminium oxide is a very hard compound, after diamond. Anodized aluminum coating offers superior scratch and abrasion resistance than coated surfaces.   __________________________________________________________________________  Affordable Cost - A lower finishing cost with a less maintenance price will provide a good return for your money. __________________________________________________________________________  Layout an aesthetic look Anodizing offers a variety of gloss and color by eliminating color variations. Anodizing allows the metal to maintain its metallic and lustrous appearance. The anodized finishing will enhance the natural beauty of aluminum with any artificial or natural light. __________________________________________________________________________  Environmental and Health Benefits - Anodizing is a completely safe process for human health. Its finishing is chemically stable, imperishable, non-toxic, and heat-resistant. __________________________________________________________________________  As the anodizing process is a strengthening of a naturally occurring oxide process. Therefore, it is non-hazardous and produces no dangerous by-products. __________________________________________________________________________  Summary  __________________________________________________________________________  Customer satisfaction has always been paramount for the shop fitters. They have their expert’s team who will first inspect the front area of the shop, to suggest any pros and cons of their needs.    In such cases, potential customers always prefer tailor-made shop fronts. So, the shop front fitters recommend their buyers with a variety of colors, and protective layers on their doors to make them ever last. __________________________________________________________________________  For example, it is suggested having an anodized aluminum oxide layer on the shop fronts. This will give an aesthetic finishing to their front doors, environmental-friendly. Not only this but they are safe, affordable, and durable too.   So, why don’t you try anodised aluminium shop fronts at your premises? It will enhance the beauty of your shop frontage and attract potential customers.